Best Large Shed Kits for Lawn Mower & Motorcycle Storage

🌲 Materials

Shed Kits

Floor System

• Pre-cut 2x4 Western Red Cedar floor joists
  
• 12" on-center spacing for strength and durability
  
• 5/8" plywood floor decking included
  

Wall & Roof Framing

• Precision-cut 2x3 SPF (spruce, pine, fir) framing
  

Exterior Finish

• Premium Western Red Cedar bevel siding
  
• Naturally resistant to rot, decay, and insects
  

Windows

• Durable 1/8" plexiglass glazing
  

Outdoor Living Products

• Constructed from 100% Western Red Cedar
  
• Naturally durable and weather-resistant
  
• Supplied untreated, ready for optional stain or finish
  

SHIPPING & DELIVERY: WHAT TO EXPECT

Our goal is to get your cedar kit from our mill to your property as smoothly as possible. We use professional freight carriers experienced in handling large residential deliveries.

Delivery Placement

Shipments are typically delivered to your driveway or curb. To ensure a successful drop-off, please let us know at the time of your order if you have any unusual access conditions, such as:

• Narrow roads or winding driveways
• Steep grades or low-hanging trees
• Limited space for a semi-trailer to turn around
• Restricted or gated rural access areas

Unloading: The Liftgate Advantage

In 95% of our deliveries, the truck arrives equipped with a hydraulic liftgate. This allows the driver to lower the entire pallet directly to the ground at your curb or driveway—no heavy lifting required on your part.

In rare cases where a liftgate cannot be used (due to safety restrictions or specific site conditions), our kits are designed to be easily unloaded by hand:

• Manageable Pieces: Individual components are packed in sections (most under 35 lbs) that two people can handle comfortably.
• Quick Process: By simply cutting the securing straps, two people can typically have the shipment unloaded in just 15–30 minutes.

Shipping Coverage & Location

• All-In Pricing: For the continental U.S., our listed prices include standard motor freight shipping. Smaller accessories may ship via UPS or FedEx.
• Alaska & Hawaii: We love shipping to the islands and the far north! These orders are handled via ocean freight. Please contact our team directly at 1-800-830-8033 to arrange a custom shipping quote.

SHIPPING TO THE USA: THE BORDER IS ON US

We’ve officially taken the "international" out of international shipping. All Cedarshed kits ship directly from our facility in the North Okanagan, British Columbia, with full-service customs handling included. We manage the entire import process on your behalf so your delivery feels just like a domestic shipment.

Hassle-Free Customs & Fees

• No SSN or Tax ID Required: You no longer need to provide personal identification or Social Security numbers for customs clearance.
• Fully Prepaid: We handle all duties and brokerage fees upfront. There are no surprise import charges or tariffs (all our products are USMCA-compliant).
• Zero Paperwork: From the moment you check out until the shed arrives at your curb, we handle all the red tape.

What to Expect on Delivery

Your order is shipped via professional motor freight and delivered directly to your address.

• Scheduled Appointments: For all shed kits, the carrier will contact you in advance to schedule a delivery window that works for you.
• Standard Liftgate Service: Most deliveries include a hydraulic liftgate, allowing the driver to lower the entire pallet safely to the ground.
• Navigating Your Site: In rare cases where a large truck might struggle with narrow or steep roads, the carrier will work with you to coordinate the safest possible drop-off point.

The Bottom Line: We’ve made the process turnkey. You just pick your shed, and we’ll handle the border, the brokers, and the transport.

DELIVERY TIMELINE & TRACKING

We know you’re excited to get your new cedar space set up. We work to process and ship every order as efficiently as possible while maintaining our high standards for quality control.

Typical Lead Times

• Standard Delivery: Our typical lead time is 3–4 weeks from the date of your order to delivery at your curb.
• Seasonal Shifts: Depending on the season and current order volume, some kits may ship even sooner. For the most up-to-the-minute estimate for your specific region, feel free to give us a shout at the time of ordering.

Order Updates & Tracking

You won't be left wondering where your shipment is.

• Instant Notification: As soon as your order departs our facility, we will email you a tracking number.
• Real-Time Updates: You can follow your shipment’s progress as it makes its way from our mill to your local delivery terminal.

Delivery Scheduling

Once your kit arrives at the local terminal near your home, the carrier will contact you directly to:

1. Schedule a Delivery Date: You pick the day that works best for your schedule.
2. Provide a Delivery Window: This ensures you know when to expect the truck so you can be available to receive the shipment.

WARRANTY & SUPPORT: OUR COMMITMENT

We understand that a Cedarshed is an investment in your home and your lifestyle. Our goal is to ensure you feel confident in that investment from the day it’s delivered through years of backyard enjoyment.

1-Year Limited Warranty

Every structure purchased directly from Cedarshed is backed by our 1-Year Limited Warranty against defects in manufacturing and workmanship. We take pride in our milling process, and we stand behind every panel that leaves our facility.

Built for the Long Haul

Cedarshed products are crafted from Western Red Cedar, one of nature's most resilient building materials. Known for its natural resistance to rot, decay, and insects, your shed is purpose-built for the outdoors.

• Proper Care: With a quality stain and routine maintenance, these structures are known to provide decades of reliable service.

Missing or Damaged Parts? We’ve Got You.

If something isn't right when your shipment arrives, we are here to fix it—fast.

• Step 1: Inspect. Give your shipment a look-over upon delivery.
• Step 2: Document. Snap a few photos of any damaged or missing components.
• Step 3: Contact. Email us or call 1-800-830-8033 with your order number.

Our Promise: Once confirmed, we will arrange for replacement parts at no charge. We typically ship replacement components within 10 business days to keep your project on track.

Reporting Timeline

To help us resolve issues quickly with our carriers, please report any missing or damaged parts within 14 days of delivery. If you won't be able to inspect the kit right away, just send us a quick note in writing to request an extension.

HOW TO BUILD A FOUNDATION
Cedarshed recommends three different methods for constructing basic foundations for our cedar products:
• Patio Stones
• 4x4 Pressure Treated Beams
• Concrete Slab

With all our products, we recommend the following "Step-By-Step" procedures.

1 / Prepare Your Site for Construction Before you receive your garden shed or gazebo, clear the construction area. Remove all debris, roots, grass and rocks. Make sure the ground slopes away from the site at least 10 feet in all directions. If necessary, build up the soil in the center of the site and slope away for the high point to provide drainage. Fill in any low spots within the perimeter of the site. A slope of 1/8 inch per foot is enough to prevent water accumulation. We recommend excavating the site 4 inches deep and laying gravel or crushed rock where drainage may be a concern.

2 / Laying Out The Foundation No matter which type of foundation you’ve chosen, start by outlining the "footprint" on the site. Start by choosing one corner of the garden shed or the center of gazebo and mark it (A) by driving a stake into the ground. FOR GARDEN SHEDS Stretch a line from stake A straight across C and fasten it to a temporary stake outside the intended shed area. Measure along this line from A and mark the garden shed dimension in that direction. Drive a stake there and set up batter boards. Use the 3-4-5 triangulation method to extend another line at right angles to the A-C line. Measure to the next corner and stake it. Continue until all corners of the shed are connected by right angle lines. 3-4-5 Triangulation Method Measure along the line 3 feet from the first stake A, and mark the string at this point. From stake A, run a second line perpendicular to the first. Measure out 4 feet to locate point C. If this second line is exactly at a right angle to the first, the diagonal line between A & C will be 5 feet. If not, move point C left or right until the diagonal measures 5 feet and stake that point. No matter which type of foundation you’ve chosen, start by outlining the "footprint" on the site. Start by choosing one corner of the shed or the center of gazebo and mark it (A) by driving a stake into the ground. Run a line across two stakes. Measure from point A on the first stake along this line 3 ft. and mark point B. Run a second line perpendicular to the first across point A. Mark point C 4ft. from point A. Move line AC so that the distance BC is exactly 5 ft. Angle BAC is now 90 degrees. Set up batter boards and guide lines to outline the entire shed, making right angles at each corner using the 3-4-5 triangle method described in step 3. FOR GAZEBOS Stretch a radial line from center stake A. Calculate the radius by using 1/2 the diameter of gazebo. Using orange spray paint or something similar, mark out a circle. First determine door location by using one Rim Joist of Gazebo, stake points where rim joist intersects circle. Move around circle staking out all intersecting points until all corners are connected. See Specifications Sheet for Rim Joist size and radius measurement.

3/ Determine The Type Of Foundation 1. PATIO STONE FOUNDATION If the ground is stable and has sufficient drainage, you can set patio stones directly on firm, compacted soil. If not, lay on gravel or crushed rock as previously described. GARDEN SHEDS: Starting with one floor section, position stones around its perimeter and specific joists. (For details, see specific instruction manual) Use a 2x4 straight piece of lumber on edge and a carpenter’s level to position correctly. Add or remove soil/sand under each stone until level. Complete remaining floor sections in the same manner. When all floor panels are level with each other, flip over, screw together and place back on level foundation. GAZEBOS: Position patio stones on outline of gazebo previously described. For details of how and where stones go, see specific instruction manual. Use a 2x4 straight piece of lumber on edge and a carpenter’s level to position correctly. Add or remove soil/sand under each stone until level. When stones are level, position completed sub-structure (Rim, Long & Short Joist and Core Block) on top. Once again, use a level to confirm positioning and make any necessary adjustments. 2. 4x4 PRESSURE TREATED BEAM FOUNDATION You can build directly on pressure-treated beams or railroad ties laid on a properly prepared construction site. Run beams perpendicular to floor joists. Use a 2x4 straight piece of lumber on edge and a carpenter’s level to position correctly. To prevent the beams from shifting, secure them with a 1/2" inch rebar inserted through holes drilled in the beams and driven 3 to 4 feet into the ground. Leave each side or end of the foundation open to promote drainage and air circulation beneath the floor. 4x4 PRESSURE TREATED FOUNDATION This simple foundation consists of pressure treated beams laid directly on compacted gravel base. Use 1/2 " rebar to prevent beams from shifting. Joists are attached to beams with 16d galvanized nails. 3. CONCRETE SLAB FOUNDATION Typically a slab 3-4 inches thick laid over a subbase of 4 inches of gravel or crushed rock is sufficient but may vary depending on your geographic location. Using either mix your own concrete of having it delivered by truck, ready to pour, depends on how much time and effort you have to dedicate to the project. A slab for our 8x10 foot Rancher or a 10 foot gazebo both to a depth of 4 inches will require approximately 1 cubic yard of premixed concrete. Use the following procedure: 1. Excavate the slab area and footing trench. 2. Excavate the slab area to a depth 6 inches. This would put the finished slab surface 2 inches above ground (4 inches of gravel) 3. Set up your batter board strings to represent the outside face of the slab. At each corner, drop a plumb line from the intersecting strings to the bottom of the trench, then drive a 2x4 stake at this point. Using the plumb bob again, drive a nail into the top of the stake where the plumb bob touches it. Attach strings between the stakes. Using the strings as guides, drive the 2x4 form stakes around the trench perimeter, spaced on 2 foot centers. 4. Attach the form boards to the stakes with double-headed nails. Make sure the stakes are on the outside of the boards and flush with or below them. 5. Use 2x4 stakes to brace the corners of the forms. 6. Backfill the excavation with 4 inches of gravel, then lay down a plastic vapor barrier. 7. Spread or pour concrete with a rake or hoe, compacting it gently into the footing areas. Use a shovel to move concrete into footing trench. Make the pour to about 1 inch above the forms to allow for settling. Use a long 2x4 to level the concrete. Move the board in a side-to-side motion as you pull it towards you. 8. Use finishing tools, such as a bull float and trowel, to smooth the concrete surface. Allow the concrete to cure fully (seven to ten days). CONCRETE SLAB FOUNDATION 1. Backfill excavation with gravel; install vapor barrier. 2. Pour concrete into the forms, and spread it with a rake or shovel. Use a long 2x4 to screed the concrete level. 3.Use finishing tools, such as a bull float and trowel, to smooth the concrete surface to the desired finish.